FPGA Arcade Board

Written by

Peter Swimm

in

6a00d83452989a69e2011570212c35970b-800wiVia

MikeJ says, “The board will support all the games on the FPGA Arcade site, as well as my Atari ST core and a customized and supported MiniMig Amiga core. Other platforms such as BBC B, Commodore 64 and Spectrum will also follow shortly.

The board has an ARM processor which interfaces the FPGA to the SD card. Hard disk images, ROMs and floppy disk images can be used from the SD card. There are two expansion boards, one with TV out and some rear mounted connectors for the joysticks (fits in a mini-itx case), and a second board with a prototyping array. There are around 130 pins available on the expansion connector.

The board has DVI and Analogue out. The DVI connector can be used to drive a HDMI input of a flat screen TV, so you can play PacMan on the big screen. I am planning to do Asteroids in true 1080P :) The analogue audio output uses a very high quality Wolfson DAC.”

Comments

2 responses to “FPGA Arcade Board”

  1. Akira||8GB

    I want this!

  2. kam

    I need this board

    thanks,
    kam

More posts